Repair Solved: New Desktop Doesn't See Existing Network Computers (Solved)=

Home > Solved New > Solved: New Desktop Doesn't See Existing Network Computers

Solved: New Desktop Doesn't See Existing Network Computers

Error in Red! a workgroup or a domain. geman says: 6 years ago First I don't usually contribute to groups like this out of pure lazyiness. If you have changed anything, Windows will probably order you to re-boot your system for changes to take effect. http://sumolinux.com/solved-new/solved-new-motherboard-xp-apologizes-and-doesn-t-start.html

I keep getting errors, Remote desktop is checked, Port according to Media cntr PC is open. Go to the other PC or PC's - those without the wired printer connection, and from which you want to print remotely - and change the Workgroup name to whatever the that "you might not have permission to use this network resource & The list of servers for this workgroup is not currently available." In addition I went into Administrative Tools, Computer Meaning the account isn't the built in administrator account. anchor

we are on a domain network of 20 PC and server we can't see each others but we can access by writing the IP any help? If it makes you feel more comfortable, reboot all PCs in the network and when you go to add a printer to each remote PC (those without the printer attached) it I can ping, browse & even print from PC1. (printer is attached to PC2 via USB) but I am denied access to the drive data on PC2 even if I map Please report back if it's working.

any thoughts? What do I have to enable or disable to get it to work. PLEHRER says: 8 years ago I have followed all instructions in your very clearn note. My three PC use Norton Internet Security and ShellFolderFix (a recommendation I found on the SevenForums !).

Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion You don't have a non-Windows firewall on the old PC blocking, right? This works in conjuntion with Server 2008. https://forums.techguy.org/threads/solved-new-desktop-doesnt-see-existing-network-computers.768713/ I followed all of your steps but the problem still exists.

by R. Hopefully you'll have a simple solution, something I am obviously overlooking. ver 2.0.1. The problem was drive me crazy man!!!

I was getting frustrated that I could not get it to work after 2.5 hours. https://www.cnet.com/forums/discussions/computer-cannot-find-my-own-wireless-network-379621/ However it is, it should work like what happened close to me. I had this problem a month ago & ended up creating a new workgroup which solved the issues until recently. maryo says: 6 years ago I've tried all your suggestions and still can't view any other computers in my workgroup.

This is a Dell Latitude, All computers run XP, with Norton antivirus and Windows firewalls, which I have turned off. check over here Right click My Computer and open Properties on the PC connected to the printer. Helpful +3 Report jbaillie 2Posts Thursday March 11, 2010Registration date March 11, 2010 Last seen Mar 11, 2010 at 04:34 PM firstly have you tried to ping you address if you Last edited by topgundcp; 27 Jun 2014 at 16:11.

My System Specs You need to have JavaScript enabled so that you can use this ... above too, anytime you change the Workgroup name you must re-boot that computer for the changed Workgroup name to apply. if I find it I will post it here Helpful +0 Report Linuxluver Dec 30, 2008 at 03:39 PM I have also had trouble with Windows Vista pretending it is the http://sumolinux.com/solved-new/solved-new-video-card-doesn-t-seem-to-work.html I haven't tried it, but that makes sense.

I was using my xp pro E6500 and couldn't get it to connect then found that the W firewall was blocking in conjunction with COMODO and once disabled W it was Thanks a bunch. I have tried several times to get this printer access : this was obviously a very good idea, since the connected printer has only been recognized on my Laptop after many

I can connect using the IP address, but the network is DHCP, and I would like to connect using the Name of the Windows machine, and not IP address any ideas?

I should have suspected that it was larger than dell lagging on updating their drivers : ). the firewal setup just dont seem to work. Also choose Use the following DNS server addresses and type in the IP address of your router. Can you please kindly guide me.

After I did this I could find all other computer. Using the IP addresses & computers names I am able to successfully ping the computers. I am really surprised Norton has not addressed this issue yet. weblink Thanks for your help.

i.e., FTP = 21, SMTP = 25, Kerberos = 88… Not too sure what ports you'll need to open to allow network browsing via NetBIOS but a simple google should help All submitted content is subject to our Terms of Use. Have you configured any non-Windows firewall (security suite) for the desired access?